Basic Operations
31
Adjusting the Projected Image
c
Since images are unstable immediately after the projector is turned on, before you make focus, zoom,
or lens shift settings, we recommend waiting 30 minutes or more after starting to project the images.
Displaying the Test Pattern
When adjusting the zoom/focus or the projection position just after setting up the projector, you can display
a test pattern instead of connecting video equipment.
Press the
button on the remote control to display the test pattern. The standard for horizontal lines
at the top and bottom uses 2.40:1 CinemaScope.
When you select Color Isolation while projecting images, the color selected from R (red), G (green), or B (blue)
is projected. (EH-TW6800 only)
Press the
button again to end the test pattern display.
Adjusting the Focus
Turn the focus ring to adjust the focus.
Adjusting the Projection Size (Adjust Zoom)
Grip the knob and turn the zoom ring to adjust the size of the projected image.
Downloaded from www.vandenborre.be
To Next Page
Loading...
