Useful Functions
64
b
Check the status of the WiHD indicator on the WirelessHD Transmitter.
If the WiHD indicator is on, go to the next step.
If the indicator is off, press the button on the remote control or the button on the
WirelessHD Transmitter.
Make sure you point the remote control at the WirelessHD Transmitter when using the
button
on the remote control.
Remote control WirelessHD Transmit-
ter
c
Check the status of the Link indicator on the WirelessHD Transmitter.
If the WirelessHD Transmitter is connected to the projector, the Link indicator turns on.
c
•
If the indicator does not turn on, check that the projector has been prepared correctly and that
it is turned on.
•
You can view the signal strength while images are being projected from the WirelessHD settings
menu.
s Settings - WirelessHD - Video Reception p.89
Downloaded from www.vandenborre.be
To Next Page
Loading...
Need help?
General
