Configuration Menu
93
Function Menu/Settings Explanation
Display
Messages On, Off Sets whether or not to display the following
messages (On or Off).
•
Item names for image signals, color modes,
and aspect ratios.
•
If the internal temperature is rising when no
image signal is being input or an unsuppor-
ted signal is detected.
Display
Background
Black, Blue, Logo Selects the screen status when no image sig-
nal is being input.
Startup
Screen
On, Off Sets whether or not to show a startup screen
when projection begins (On or Off). If
changed, this setting is enabled after you
power off the projector and the cool-down
process is complete.
Standby
Confirma-
tion
On, Off Sets whether or not to display a standby con-
firmation message (On or Off).
s p.30
Panel Align-
ment
-
s p.95
Color Uni-
formity
*
Color Uni-
formity
On, Off Enables or disables Color Uniformity.
Adjustment
Level
There are eight levels from white, through
gray, and up to black. You can adjust each
level individually.
Start Adjust-
ments
Red, Green, Blue Starts making Color Uniformity adjustments.
Reset Yes, No Resets all adjustments and settings for Color
Uniformity to their default values.
Projection
Front, Front/Ceiling, Rear, Rear/Ceiling Change this setting depending on how the
projector is installed.
Downloaded from www.vandenborre.be
To Next Page
Loading...
Need help?
General
