Configuration Menu
98
Function Menu/Settings Explanation
IP Settings
(This can only be set
when Connection
Mode is set to Ad‐
vanced.)
DHCP Sets whether or not to use DHCP (On or Off). If this is set to
On, you cannot set any more addresses.
IP Address Inputs the IP address for the projector.
The following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask Enter the projector's subnet mask.
The following subnet masks cannot be used.
0.0.0.0
、
255.255.255.255
Gateway Address Inputs the gateway IP address of the projector.
The following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display
On, Off Sets whether or not to display the SSID on the LAN Standby
screen and the Home screen (On or Off).
IP Address Display
On, Off Sets whether or not to display the IP address on the LAN
Standby screen and the Home screen (On or Off).
Security menu
Function Menu/Settings Explanation
Security
No, WPA2-PSK, WPA/
WPA2-PSK
Sets the security.
In Quick, WPA2-PSK is selectable. In Advanced, WPA2-
PSK/WPA/WPA2-PSK is selectable.
Passphrase
From 8 to 32 single-
byte alphanumeric
characters
Inputs the passphrase.
It is recommended to change the passphrase periodically for
the purpose of security.
Wired LAN menu (EH-TW6800 only)
Function Menu/Settings Explanation
DHCP On, Off
Set whether or not (On/Off) to use DHCP. If this is set to On,
you cannot set any more addresses.
IP Address 0 to 255 characters Enter the IP address assigned to the projector.
The following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask 0 to 255 characters Enter the projector's subnet mask.
The following subnet masks cannot be used.
0.0.0.0
、
255.255.255.255
Gateway Address 0 to 255 characters Enter the projector's gateway IP address.
The following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
IP Address Display On, Off Set to Off to prevent the IP address from being displayed on
the Net. Info. - Wired LAN screen.
Downloaded from www.vandenborre.be