Configuration Menu
84
Function Menu/Settings Explanation
Display
Menu Position - Sets the position where the menu
should be displayed.
Messages On, Off Sets whether or not to display the fol-
lowing messages (On or Off).
•
Item names for image signals, color
modes, and aspect ratios.
•
If the internal temperature is rising
when no image signal is being input
or an unsupported signal is detec-
ted.
Display Back-
ground
Black, Blue, Logo Selects the screen status when no im-
age signal is being input.
Startup Screen On, Off Sets whether or not to show a startup
screen when projection begins (On or
Off). If changed, this setting is enabled
after you power off the projector and
the cool-down process is complete.
Standby Con-
firmation
On, Off Sets whether or not to display a stand-
by confirmation message (On or Off).
s p.27
Panel Align-
ment
-
s p.86
Color Uniformi-
ty
Color Uni-
formity
On, Off Enables or disables Color Uniformity.
Adjustment
Level
There are eight levels from white,
through gray, and up to black. You
can adjust each level individually.
Start Adjust-
ments
Red, Green, Blue Starts making Color Uniformity ad-
justments.
Reset Yes, No Resets all adjustments and settings
for Color Uniformity to their default
values.
Projection
Front, Front/Ceiling, Rear, Rear/Ceiling Change this setting depending on
how the projector is installed.
To Next Page
Loading...
Need help?
General
