8
Part Names and Functions
Rear
• Remote control light-receiving
area sp.i
Receives signals from the remote control.
• Power inlet sp.i
Connects to the power cable.
• Computer port sp.i
Inputs analogue RGB video signals from a
computer and RGB video signals and
component video
g signals from other video
sources.
• Video port
sp.i
Inputs composite
videog signals to
the projector from
other video sources.
• S-Video port
sp.i
Inputs S-Videog
signals to the
projector from other
video sources.
• USB port sp.23, p.69
Connects the projector to a computer via the
USB
g cable when using the wireless mouse
function.
Computer images cannot be projected
by using the USB cable to connect the
computer.
• Monitor Out port sp.65
Outputs the projected computer's analogue
RGB signals or RGB video signals to an
external monitor from the source that is
connected to the Computer port. This
feature is not available for video equipment
signals.
• Speaker
• Rear adjustable foot
• Audio input sp.i
Input audio signals from connected external
equipment.
When you are connecting two or more pieces of
external equipment that use the same input port,
you need to disconnect one before connecting
the other, or use an audio selector.
To Next Page
Loading...
Need help?
General
