35
List of Functions
"Settings" Menu
Sub-menu Function
Keystone Corrects vertical keystone distortion in images. sp.i
Zoom Adjusts the size of the projected image. sp.i
Wide: Larger Tele: Smaller
Image Shift Adjusts the projection position. sp.16
Operation
Lock
When set to "ON", the operation of all buttons on the projector's control panel except for the [Power] button will be disabled. sp.29
Pointer
Shape
The shape of the pointer can be selected. sp.21
Pointer 1: Pointer 2: Pointer 3:
Brightness
Control
This lets you set the lamp brightness to one of two settings.
Select "Low" if the images being projected are too bright such as when projecting images in a dark room or onto a small screen.
When "Low" is selected, the brightness of the images is reduced, the amount of electricity consumed and noise produced during projection are
reduced and the lamp's operating life is extended. (Electrical consumption: about an 18 W decrease, lamp life: about 1.5 times longer)
Volume Adjusts the volume. sp.17
Reset
Adjustment values for the "Settings" menu functions are returned to their default settings, except for "Image Shift" and “Zoom".
If you would like to return all menu items to their default, see "Reset All". sp.39
To Next Page
Loading...
Need help?
General
