Epson EMP-S3 User Manual

Projection Procedure
This explains the basic operations for preparing the projector before use and for starting projection.
Setup....................................................................... i
• Using the remote control........................................................i
Connecting to Visual Equipment ......................... i
Turning on and Projecting ................................... ii
• No image is projected........................................................... ii
• Adjusting Position and Focus.............................................. ii
• Turning the Projector off..................................................... ii

Epson EMP-S3 Specifications

General

Brightness	1600 ANSI lumens
Resolution	800 x 600 (SVGA)
Contrast Ratio	400:1
Display Technology	3LCD
Screen Size	30 - 300 inches
Lamp Type	170W UHE
Lamp Life	3000 hours (standard), 4000 hours (eco mode)
Projection Lens	Manual focus
Input Ports	VGA, Composite, S-Video
Output Ports	VGA
Operating Temperature	5°C to 35°C