Epson EMP-S3 User Manual

15
Adjusting the Image Quality
PROCEDURE
Each time you press the button, the colour modes change in the
following order.
The current setting appears in the top-right corner of the screen each
time the colour mode is changed. While the colour mode name is
displayed on the screen, it does not change to the next colour mode
setting unless you press the button.
The colour mode can also be set using the "Color Mode"
command in the "Image" menu. sp.33
Remote control

Epson EMP-S3 Specifications

General

Brightness	1600 ANSI lumens
Resolution	800 x 600 (SVGA)
Contrast Ratio	400:1
Display Technology	3LCD
Screen Size	30 - 300 inches
Lamp Type	170W UHE
Lamp Life	3000 hours (standard), 4000 hours (eco mode)
Projection Lens	Manual focus
Input Ports	VGA, Composite, S-Video
Output Ports	VGA
Operating Temperature	5°C to 35°C