Using
FASTACAD. BAT
You need to run the FASTACAD.BAT file before you start your
AutoDesk application.
Y
OU
can type
F
ASTACAD
and press
before you run the application for the first time.
You can also modify your AUTOEXEC.BAT file so that it
automatically runs FASTACAD. For MS-DOS 3.2 or earlier,
place the command “FASTACAD” as the last command in your
AUTOEXEC.BAT file and make sure the directory containing
FASTACAD is in your path. For later versions of MS-DOS, use
the command “CALL FASTACAD” anywhere in the
AUTOEXEC.BAT file.
You can also place the commands within the FASTACAD file
directly into your AUTOEXEC.BAT file or include them in a
batch file which also starts your AutoDesk application.
Configuring VGA Colors
You can modify all your screen colors, including menu colors,
text colors, dialog box colors, and drawing colors using the
CustomColors utilities COLOR16.EXE and COLOR256.EXE.
These utilities are on your Utility 1 diskette.
CustomColors allows you to select the colors you want to
display in your AutoDesk product using a simulated screen,
complete with all possible objects.
Note
You must run DLDSETUP before you can configure your
VGA colors.
VGA Utilities 11
To Next Page
Loading...
