GEM, Version 3.x
The table below lists the driver filenames for the resolutions
available for GEM.
GEM driver files
Filename
SDA600.VGA
SDA768.VGA
Resolution
800X600
1024 x
768
If you have not yet installed GEM, follow the instructions in
your GEM documentation to install it with the standard EGA
(IBM Enhanced Card and 16-Color Display) driver.
GEM requires that you install drivers from the root directory of
a diskette in drive A. To install the drivers for GEM, you’ll need
to do the following:
Create a GEM driver pack
Install the drivers using the INSTALL program
Configure GEM for your new driver.
Creating a GEM Driver Pack
Follow these steps to create a GEM driver pack:
1.
Insert a blank diskette in drive A.
2.
Format the disk using the MS-DOS FORMAT command.
You’ll see a prompt for the volume label.
3.
Type the following volume label name and press :
GEM DRIVRPK
22 VGA Utilities
To Next Page
Loading...
