7.
From the configuration options menu, select Hardware and
press
8.
Then select Screen Driver and press
9. Select The screen driver
I
need isn't listed
here
and press
10. Select I want to enter my own driver filename
and press
11.
Type the filename of the
driver you want
to use and press
(The table above lists the driver filenames. Make
sure you include the SC extension.)
12. Type M to return to the main menu.
13. At the main menu,
selectsave All New Settings
and
press
14.
When you
see On which disk drive will Setup
find your Drivers Disk?,
type c and press
15. Select option (2) to save the new settings in your FWSETUP
file.
VGA Utilities 21
To Next Page
Loading...
