Epson Endeavor - Installing the Drivers

4.
Use the MS-DOS COPY command to copy the following files
from the GEM/3 system master diskette to the GEM
DRIVRPK diskette you just formatted:
GEMVDI.EXE
MDGEM? . SYS
Installing the Drivers
Follow these steps to install the drivers onto your GEM driver
pack diskette:
1.
Insert the Utility 1 diskette in drive A.
2.
Follow the instructions on page 6 to run the INSTALL
program. When it prompts you to select a drive and
directory, type a directory on your hard disk where you can
easily locate the files to copy them to a diskette; for example:
C:\TEMP
3.
Select the GEM/3 driver from the list of display drivers and
respond to the prompts as they appear on the screen. The
program displays the names of the drivers as it copies them
to your hard disk.
4.
Insert your GEM DRIVRPK diskette in drive A.
5.
Use the MS-DOS COPY co
mmand
to copy the drivers from
your hard disk to the root directory of the diskette in drive
A; for example:
COPY C:\TEMP\*.* A:\
VGA Utilities 23