Microsoff Windows, Version 3. 1
You must install the VGA drivers for Windows 3.1 using both
the INSTALL program on the Utility 2 diskette and the
Windows Setup program.
Installing the Drivers
If you have not yet installed Windows 3.1, follow the
instructions in your Windows documentation to install it. Select
VGA as the default display device. Then follow these steps to
install the new drivers:
1.
Within Windows, select Run from the file menu in the
Program Manager.
2.
Insert the Utility 2 diskette in drive A.
3.
Type the following command and select
OK
or press
A:\INSTALL
4.
When the INSTALL program asks you to identify your
Windows directory, press to accept the default or
delete the default and type the path for your Windows
directory.
5.
Select
OK
or press The program copies the Windows
drivers and the SetRES utility to the program directory and
creates a SetRES utility icon in your Windows program
manager.
6.
When you see the message telling you that the drivers and
utility were successfully added, select
OK
or press .
VGA Utilities 35
To Next Page
Loading...
