Epson Endeavor - Changing the Jumper Settings

9. Press to accept this option.
10. Continue pressing until you see the following
message across the bottom of the screen:
[N] Next Menu [X] Exit [exc] Aborts all
change.
11. PressX.
When you run VersaCAD 2D, the program uses the 800 x 600
resolution in X-color mode.
WordPerfect, Version 5.0
The WordPerfect 5.0 driver can run the program in 800 x 600,
16-color graphics mode.
If you have not yet installed WordPerfect 5.0, follow the
instructions in your WordPerfect documentation to install it.
Then follow these steps to install the new driver:
1.
2.
3.
4.
5.
6.
Run the INSTALL program, described on page 6, to copy
the driver files to the WP driver subdirectory on your hard
disk.
Log onto your WordPerfect program directory.
Type WP and press to start WordPerfect.
Hold down and press to display the Setup menu.
Select Display.
At the Display menu, select Graphics
Screen Type.
VGA Utilities 45