8. When you see Accept the configuration as shown
above, press
9.
Follow the rest of the instructions on the screen and in your
Windows documentation to complete the installation.
To change your VGA resolution, you can run the Setup
program from within Windows or you can run the SetRES
utility described on page 52. To use the SetRES utility, however,
be sure you have selected the MultiResolution driver from
the Windows Setup program.
Microsoft Word, Version 5.0
The driver for Word 5.0 supplied with your computer supports
both high resolution text and graphics.
If you have not yet installed Word 5.0, follow the instructions in
your Word documentation to install it with the standard VGA
driver. Then follow these steps to install the new driver:
1.
Run the INSTALL program, described on page 6, to copy the
driver file to the Word program directory on your hard
disk.
2.
Type
WORD
and press to start Word.
3. Select Options.
4. Highlight the display mode option.
5.
Press to see a list of display modes. The table below
lists the available options and the display modes they
produce.
VGA Utilities 37
To Next Page
Loading...
