8.
Select the driver you want to install from the displayed list
and press .
9.
10.
11.
12.
13.
Select Return
to menu and press
At
the Installation menu, select Save
changes.
At the prompt type,
the name
you
want to use
for the driver
set and press
Exit the Lotus Install program.
When you start Lotus l-2-3 or Symphony, type 123 or
SYMPHONY,
followed by the name of the driver set you
want to use, and then press
lotus 1-2-3, Version 3.x
and graphics resolutions available for lotus 1-2-3, version 3.X.
The table below lists the driver filenames for the text modes
Lotus 1-2-3, version 3.x driver files
VGA Utilities 29
To Next Page
Loading...
