Epson Endeavor - Changing the Processor Speed

Configuring the Drivers
Once you have used the INSTALL program to copy the drivers
to your Windows program directory, follow these steps to
configure the drivers:
1. Open the Windows Setup icon.
2. Select options.
3. Select change system settings.
4. Select Display.
5. From the Display menu, select Other (Requires disk
provided by a hardware manufacturer).
6. When the program prompts you to insert your display driver
diskette and displays the path A : \, insert the Utility 2
diskette and press
You see a list of drivers:
7. Select the driver you want and press If you want to be
able to use the SetRES utility, select cirrus
542x
Multi-Resolution.
36 VGA Utilities