5.
6.
7.
8.
9.
When
you see the
main
menu, select
Configuration
and
press
From the change config
uration menu, select Primary
Hardware
and press
Then select Screen Driver
and press
Select I want to enter my own driver filename
and press
Type
the filename of the driver you want to use and press
(The table above lists the driver filenames. Make
sure you include the. SC extension.)
10. Type
M
to return to the main menu.
11. At the
mainmenu, select Save All
New
Settings
and
press
12. You see a prompt instructing you to insert your Setup
diskette in drive A. Instead, insert the diskette containing
the drivers on the root directory.
13. Press
the space bar. The Setup program saves the current
configuration.
14. Select option ( 2 ) to copy the files to your hard disk, then
press any key.
VGA Utilities 19
To Next Page
Loading...
