Paper Separator
1. Remove the fusing unit. (Refer to Section 3.2.3.6.)
2. Release the lock of the holder and remove the 3 paper separator.
ASSEMBLY POINTS
When reinstalling the paper separators, be careful of these positions as the middle one
differs from others.
Paper Exit Sensor
1. Remove the fusing unit. (Refer to Section 3.2.3.6.)
2. Remove the paper exit sensor.
Figure 3-24. Removing the Paper Separator
Figure 3-25. Paper Exit Sensor
EPL-5500 Service Manual Disassembly and Assembly
Rev. B 3-17
To Next Page
Loading...
