Fusing Roller
1. Remove the fusing unit. (Refer to Section 3.2.3.6.)
2. Remove the 2 G-rings from the fusing unit.
CAUTION
When reinstalling the G-rings:
❒
Be careful of the direction.
❒
Securely position them into the grooves of the fusing roller.
3. Remove the upper fusing roller drive gear.
4. Remove the upper fusing roller.
Figure 3-26. Removing the G-Rings
Figure 3-27. Removing the Upper Fusing Roller
Disassembly and Assembly EPL-5500 Service Manual
3-18 Rev. B
To Next Page
Loading...
