Epson Equity 386/25 - Deleting a Power-On Password

The screen does not display what you type.
3. Press Enter. A happy face character appears and then the
computer loads MS-DOS.
To access the computer the next time you turn it on or reset it,
you must enter the new power-on password.
Deleting a Power-on Password
To delete your power-on password, follow these steps:
1. If you do not have a hard disk, insert your Startup diskette
in drive A.
2. Turn on or reset the computer. At the key prompt, enter
your current power-on password followed by a forward slash.
For example, if your password is 123, type:
123/
3. Press Enter. A happy face character appears and then
the computer loads MS-DOS.
The next time you turn on or reset the computer, it does not
request a password and loads MS-DOS immediately.
3-4
Using the Equity 386/25