Epson Equity 386/25 - Page 90

To remove the diskette, turn the latch up until it is horizontal
and the edge of the diskette pops out. Carefully pull out the
diskette, place it in its protective envelope, and store it in a
proper location, such as a diskette container.
If you have a 3 ½-inch diskette drive, insert the diskette with
the label facing up and the metal shutter leading into the drive,
as shown below. Slide the diskette into the drive until it clicks
into place.
To remove the diskette, press the release button. The diskette
pops out of the drive. Pull out the diskette and store it properly.
Using the Equity 386/25
3-23