Epson FX-890II User Manual

Item
Setting / value *
1
Character table
Standard model: italic, PC 437, PC 850, PC 860, PC 863, PC 865, PC 861,
BRASCII, Abicomp, Roman 8, ISO Latin 1, PC858, ISO8859-15
All other models: Italic, PC 437, PC 850, PC 437 Greek, PC 853, PC855,
PC 852, PC 857, PC 866, PC 869, MOZOWIA, Code MJK, ISO 8859-7, ISO
Latin 1T, Bulgaria, PC 774, Estonia, ISO 8859-2, PC 866 LAT., PC 866 UKR,
PC APTEC, PC708, PC720, PC AR864, PC 860, PC 865, PC 861, PC 863,
BRASCII, Abicomp, Roman 8, ISO Latin 1, PC858, ISO8859-15, PC771,
PC437 Slovenia, PC MC, PC1250, PC1251, KZ1048
International character set for italic table
Italic U.S.A., Italic France, Italic Germany, Italic U.K., Italic Denmark 1,
Italic Sweden, Italic Italy, Italic Spain 1
IPsec/IP Filtering*
3
Off, On
Link Speed & Duplex*
3
Auto, 10BASE-T Half Duplex, 10BASE-T Full Duplex, 100BASE-T Half
Duplex, 100BASE-T Full Duplex
Baud rate*
3
19200 BPS, 9600 BPS, 4800 BPS, 2400 BPS, 1200 BPS, 600 BPS
Parity*
3
None, Odd, Even, Ignore
Data length*
3
8 bit, 7 bit
Auto CR (IBM PPDS)*
3
Off, On
Manual feed wait time
1 second, 1.5 seconds, 2 seconds, 3 seconds
Buzzer
Off, On
IBM character table*
3
*
4
Table 2, Table1
Low-noise mode
Off, On
*
1
Settings with bold weight mean the standard factory settings.
*
2
Settings may vary depending on the country.
*
3
This setting is available only on Network compatible models.
*
4
This setting is available only in IBM PPDS emulation mode.
Page length for front tractor
This setting allows you to set the page length (in inches) for the continuous paper loaded on the front
push tractor.
FX-890II/FX-890IIN/FX-2190II/FX-2190IIN User’s Guide
Control Panel 93

Epson FX-890II Specifications

General

Color	No
Character sets	ISO 8859-15, Italic, PC437, PC850, PC858, Roman 8
Character pitch	10 cpi
Built-in barcodes	CODABAR (NW-7), Code 128 (A/B/C), Code 39, Industrial 2/5, Matrix 2/5, POSTNET, UPC-A, UPC-E
Maximum print speed (LQ)	115 cps
Maximum print speed (draft)	463 cps
Maximum printing width (columns)	80
Product color	Black
Page description languages	ESC P, PPDS
Sound pressure level (printing)	55 dB
AC input voltage	120 V
AC input frequency	50 - 60 Hz
Mean time between failures (MTBF)	20000 h
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	30 - 60 %
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR
Cut sheet thickness range	0.12 - 0.46 mm
Continuous paper thickness range	0.46 - 0.46 mm
Standard interfaces	Parallel, USB 2.0

Weight and Dimensions

Depth	376 mm
Width	437 mm
Height	177 mm