Epson FX Series User Manual

First byte
Second byte
Figure 11-5. Nine-pin usage
(Use CHR$(94) if you can’t generate the caret symbol (^) from your
system.) The d determines the density of the graphics: d set to 0
produces Single-Density; d set to 1 produces Double-Density.
In this format, n
1
and n
2
represent the usual width settings, but each
print pattern requires two bytes (instead of one). This means that
when you want to print 60 columns of graphics, you must send 120
data bytes.
153

Epson FX Series Specifications

General

Brand	Epson
Model	FX Series
Category	Printer
Language	English