Epson FX Series User Manual

Also notice that, because the variable RE is set to one, this pattern
repeats only once.
Now’s the time to experiment with some of your own changes to the
variables and loops.
Summary
In this chapter you used a single string of ones and zeros to create a
two-dimensional figure. You can use this technique to create large pat-
terns with little drain on computer memory, but only with highly
structured patterns.
You also used a graphics density of 72 dots per inch to produce a
one-to-one aspect ratio of the dots.
197

Epson FX Series Specifications

General

Connectivity	Parallel
Paper Handling	Friction feed, Tractor feed
Emulation	Epson ESC/P
Noise Level	55 dB(A)
Print Method	Impact dot matrix