Epson FX Series User Manual

ESCape “I1”. Enables printing of control codes 0-31. See User-defined
characters.
ESCape “J” CHR$(n). Produces an immediate one-time line feed of
n/216-inch without a carriage return. See Line feed
ESCape “K” CHR$(n
1
)CHRS(n
2
). T
urns Single-Density Graphics Mode on.
See Graphics Mode
ESCape “L” CHR$(n
1
)CHR$(n
2
). T
urns Low-Speed Double-Density
Graphics Mode on. See Graphics Mode
ESCape "M". Turns Elite Mode on. See Elite Mode
ESCape “N” CHR$(n). Sets skip-over-perforation. See Skip-over-
perforation
ESCape “O”. Turns skip-over-perforation off. See Skip-over-perforation
ESCape "P". Turns Elite Mode off. See Elite Mode
ESCape “Q” CHR$(n). Sets the right margin. See Margins
ESCape “R” CHR$(n). Selects an international character set. See
International character set
ESCape “S0”. Turns Superscript Mode on. See Script Mode
ESCape “S1”. Turns Subscript Mode on. See Script Mode
ESCape "T". Turns either Script Mode off. See Script Mode
ESCape “U0”. Turns Continuous Unidirectional Mode off. See
Unidirectional Mode
ESCape “U1”. Turns Continuous Unidirectional Mode on. See
Unidirectional Mode
ESCape "W0". Turns Expanded Mode off. See Expanded Mode
ESCape “W1”. Turns Continuous Expanded Mode on. See Expanded
Mode
ESCape "Y" CHR$(n
1
)CHR$(n
2
). T
urns High-Speed Double-Density
Graphics Mode on. See Graphics Mode
ESCape “Z” CHR$(n
1
)CHR$(n
2
). T
urns Quadruple-Density Graphics
Mode on. See Graphics Mode
ESCape “^” CHR$(d)CHR$(n
1
)CHR$(n
2
). Enters Nine-Pin Graphics Mode.
See Graphics Mode.
ESCape “b” CHR$(N)CHR$(n
1
) ...
CHR$(n
k
)CHR$(0). Stores channels
of vertical tab stops. See Tabs, vertical
ESCape “i0”. Turns Immediate-Print Mode off. See Immediate-Print
Mode.
ESCape “i1”. Turns Immediate-Print Mode on. See Immediate-Print
Mode.
ESCape “j” CHR$(n). Turns reverse feed on. See Line feed
ESCape “l” CHR$(n). Sets left margin. See Margins
ESCape “p0”. Turns Proportional Mode off. See Proportional Mode.
ESCape “p1”. Turns Proportional Mode on. See Proportional Mode.
ESCape “so”. Returns to normal after Half-Speed Mode. See Half-Speed
Mode
ESCape “s1”. Turns Half-Speed Mode on. See Half-Speed Mode
Expanded Mode, 56-59
ESCape “W1” turns Continuous Expanded Mode on; ESCape “WO”
turns it off. CHR$(14) turns one-line Expanded Mode on; CHRS(20)
turns it off.
compared with Emphasized Mode, 63
Exponent character, vi
341

Epson FX Series Specifications

General

Connectivity	Parallel
Paper Handling	Friction feed, Tractor feed
Emulation	Epson ESC/P
Noise Level	55 dB(A)
Print Method	Impact dot matrix