❏ Dry the printouts completely before ling or displaying them. When drying the printouts, avoid direct sun light,
do not use a dryer, and do not touch the printed side of paper.
❏ When printing images or photos, Epson recommends using genuine Epson paper rather than plain paper. Print
on the printable side of the genuine Epson paper.
❏ Try to use genuine Epson ink bottles. is product is designed to adjust colors based on the use of genuine
Epson ink bottles. e use of non-genuine ink bottles may cause print quality to decline.
❏ Use ink bottles with the correct part code for this printer.
❏ Epson recommends using the ink bottle before the date printed on the package.
Related Information
& “Relling the Ink Tanks” on page 83
& “Checking and Cleaning the Print Head” on page 87
& “Replacing Ink inside the Ink Tubes” on page 89
& “Aligning the Print Head” on page 90
& “Paper Handling Precautions” on page 35
& “Available Paper and Capacities” on page 36
& “List of Paper Types” on page 36
Paper Is Smeared or Scued
❏ When horizontal banding appears or the top or bottom of the paper is smeared, load paper in the correct
direction and slide the edge guides to the edges of the paper.
❏ When vertical banding appears or the paper is smeared, clean the paper path.
❏ Place the paper on a
at
surface to check if it is curled. If it is,
atten
it.
❏ When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the paper.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 37
& “Cleaning the Paper Path” on page 91
User's Guide
Solving Problems
127
To Next Page
Loading...
Need help?
General
