b. Messages on the Network Environment
Message Solution
*Multiple network names (SSID) that
match your entered network name (SSID)
have been detected. Conrm network
name (SSID).
The same SSID may be set on several access points. Check the settings on the
access points, and change the SSID.
The Wi-Fi environment needs to be
improved. Turn the wireless router
o
and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.
After moving the printer closer to the access point and removing any
obstacles between them, turn the access point on. If it still does not connect,
see the documentation supplied with the access point.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.
You can simultaneously connect up to four computers and smart devices in
Wi-Fi Direct (Simple AP) connection. To add another computer or smart
device, disconnect one of the connected devices
rst.
Related Information
& “Connecting to a Computer” on page 21
& “Web Cong” on page 95
& “When You Cannot Make Network Settings” on page 120
Printing a Network Status Sheet
You can check the detailed network information by printing it.
1.
Load papers.
2. Select Setup on the home screen.
3. Select Network Settings > Print Status Sheet.
4. Press the
x
button.
e network status sheet is printed.
Replacing or Adding New Access Points
If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.
Related Information
& “Changing the Connection Method to a Computer” on page 32
User's Guide
Network Settings
31
To Next Page
Loading...
Need help?
General
