Epson L485 SERIES User Manual

❏ Enable the bidirectional (or high speed) setting. When this setting is enabled, the print head prints while
moving in both directions, and the printing speed increases.
❏ Wi n d o w s
Select High Speed on the printer driver's More Options tab.
❏ Mac OS X
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer. Click Options & Supplies > Options (or Driver). Select On as the High Speed
Printing setting.
❏ Disable Quiet Mode.
❏ Wi n d o w s
Disable the Quiet Mode setting on the printer driver's Main tab.
❏ Mac OS X
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer. Click Options & Supplies > Options (or Driver). Select O as the Quiet Mode
setting.
Printing Slows Down Dramatically During Continuous Printing
Printing slows down to prevent the printer mechanism from overheating and being damaged. However, you can
continue printing. To return to normal printing speed, leave the printer idle for at least 30 minutes. Printing speed
does not return to normal if the power is
o.
Cannot Cancel Printing from a Computer Running Mac OS X v10.6.8
If you want to stop printing from your computer, make the following settings.
Run Web Cong, and then select Port9100 as the Top Priority Protocol setting in AirPrint Setup. Select System
Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the printer, and
then add the printer again.
Related Information
& “Web Cong” on page 95
Cannot Start Scanning
❏ Connect the USB cable securely to the printer and the computer.
❏ If you are using a USB hub, try to connect the printer directly to the computer.
❏ If you scan at a high resolution over a network, a communication error may occur. Lower the resolution.
❏ Make sure you select the correct printer (scanner) if a scanner list is displayed when you start Epson Scan 2.
❏ Make sure that the correct printer (scanner) is selected on Epson Scan 2.
❏ If you are using any TWAIN-compliant applications, select the printer (scanner) you are using.
User's Guide
Solving Problems
131

Epson L485 SERIES Specifications

General

Printer Type	All-in-One
Functions	Print, Scan, Copy
Print Technology	Inkjet
Maximum Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Maximum Scan Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Connectivity	USB, Wi-Fi
Ink Tank System	Yes
Ink Type	Dye Ink
Ink Colors	Black, Cyan, Magenta, Yellow
Paper Capacity	100 sheets
Print Speed (Color)	15 ppm
Copy Speed (Black)	7.7 ipm (ISO/IEC 29183)
Copy Speed (Color)	Up to 3.8 ipm
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Display	1.44-inch LCD
Print Speed (Black)	Up to 33 ppm