Epson L485 SERIES

❏ Mac OS X printer driver
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
select the printer. Click Options & Supplies > Options (or Driver). Select On as the Quiet Mode setting.
Cannot Save the Data to a Memory Card
❏ Use a memory card which is supported by the printer.
❏ Check that the memory card is not write protected.
❏ Check that the memory card has enough available memory. If the available memory is low, data cannot be
saved.
Related Information
& “Supported Memory Card Specications” on page 142
Application Is Blocked by a Firewall (for Windows Only)
Add the application to the Windows Firewall allowed program in security settings on the Control Panel.
"?" Is Displayed on the Photo Selection Screen
"?" is displayed on the LCD screen when the image
le
is not supported by the product.
Related Information
& “Supported Data Specications” on page 142
A Message Prompting You to Reset the Ink Levels is Displayed
Rell
all or the
specied
ink tanks, select the color that you
relled
on the LCD screen, and then press the
x
button to reset the ink levels.
Depending on the usage conditions, the message may be displayed when there is still ink in the tank.
Related Information
& “Relling the Ink Tanks” on page 83
User's Guide
Solving Problems
137