Epson L485 SERIES User Manual

Scanning to a Computer (WSD)
Note:
❏ is feature is only available for computers running English version of Windows 10/Windows 8.1/Windows 8/Windows 7/
Windows Vista.
❏ If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature.
1. Place the originals.
2. Enter Scan from the home screen using the
l or r button, and then press the OK button.
3. Select To C omputer (WSD ) using the
l or r button, and then press the OK button.
4. Select a computer.
5. Press the
x button.
Note:
e color, size, and border of the scanned image will not be exactly the same as the original.
Related Information
& “Placing Originals on the Scanner Glass” on page 41
Setting Up a WSD Port
is section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e
following is necessary to set up a WSD port.
❏ e printer and the computer are connected to the network.
❏ e printer driver is installed on the computer.
1. Turn the printer on.
2.
Click start, and then click Network on the computer.
3.
Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
User's Guide
Scanning
71

Epson L485 SERIES Specifications

General

Printer Type	All-in-One
Functions	Print, Scan, Copy
Print Technology	Inkjet
Maximum Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Maximum Scan Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Connectivity	USB, Wi-Fi
Ink Tank System	Yes
Ink Type	Dye Ink
Ink Colors	Black, Cyan, Magenta, Yellow
Paper Capacity	100 sheets
Print Speed (Color)	15 ppm
Copy Speed (Black)	7.7 ipm (ISO/IEC 29183)
Copy Speed (Color)	Up to 3.8 ipm
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Display	1.44-inch LCD
Print Speed (Black)	Up to 33 ppm