Epson L485 SERIES User Manual

4. Slide the edge guide to the edge of the paper, and then close the feeder guard.
5. Check the paper size and paper type settings displayed on the control panel. To use the settings, select
Conrm using the
u or d button, press the OK button, and then go to step 7. To change the settings, select
Change using the
u or d button, press the OK button, and then go to the next step.
c
Important:
e paper setting screen is not displayed if the paper is not loaded along the right side of the rear paper feed. An
error occurs when you start printing.
Note:
❏ When the Paper Setting Alert feature in the Printer Setup menu is enabled, a message is displayed if the registered
paper size and paper type settings
dier
from the print settings.
❏
e
paper setting screen is not displayed if you have disabled Paper
Conguration
in the following menus. Go to
step 7. In this situation, you cannot print from an iPhone or iPad using AirPrint.
Setup > Printer Setup > Paper Source Settings > Paper Conguration
User's Guide
Loading Paper
39

Epson L485 SERIES Specifications

General

Printer Type	All-in-One
Functions	Print, Scan, Copy
Print Technology	Inkjet
Maximum Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Maximum Scan Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Connectivity	USB, Wi-Fi
Ink Tank System	Yes
Ink Type	Dye Ink
Ink Colors	Black, Cyan, Magenta, Yellow
Paper Capacity	100 sheets
Print Speed (Color)	15 ppm
Copy Speed (Black)	7.7 ipm (ISO/IEC 29183)
Copy Speed (Color)	Up to 3.8 ipm
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Display	1.44-inch LCD
Print Speed (Black)	Up to 33 ppm