Sending Many Pages of a Monochrome Document (Direct Send)
When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory.
erefore, sending a lot of pages may cause the printer to run out of memory and stop sending the fax. You can
avoid this by enabling the Direct Send feature, however, it takes longer to send the fax because the printer
performs scanning and sending simultaneously. You can use this feature when there is only one recipient.
Accessing the Menu
You can nd the menu on the printer's control panel below.
Fax > Fax Settings > Direct Send.
Sending a Fax Preferentially (Priority Send)
You can send an urgent document ahead of the other faxes waiting to be sent.
Note:
You cannot send your document preferentially while one of the following is in progress because the printer cannot accept
another fax.
❏ Sending a monochrome fax with Direct Send enabled
❏ Sending a color fax
❏ Sending a fax using a connected telephone
❏ Sending a fax sent from the computer (except when sending from memory)
Accessing the Menu
You c a n
nd
the menu on the printer's control panel below.
Fax > Fax SettingsPriority Send.
Related Information
& “Checking the Status or Logs for Fax Jobs” on page 135
Sending Faxes in Monochrome at Specied Time of the Day (Send Fax Later)
You can set to send a fax at a specied time. Only monochrome faxes can be sent when the time to send is
specied.
Accessing the Menu
You can nd the menu on the printer's control panel below.
Fax > Fax Settings
Enable Send Fax Later, and then specify the time of day to send the fax.
Note:
To cancel the fax while the printer is waiting for the
specied
time to arrive, cancel it from Job/Status on the home screen.
Related Information
& “Checking the Status or Logs for Fax Jobs” on page 135
Faxing
>
Sending Faxes Using the Printer
>
Various Ways of Sending Faxes
116
To Next Page
Loading...
Need help?
General
