Epson L6570 Series User Manual

See the information displayed on the printer's control panel to select the printer.
12.
On the printer's control panel, select Complete.
For smart devices that have been connected to the printer before, select the network name (SSID) on the smart
device's Wi-Fi screen to connect them again.
Related Information
& “Application for Printing Easily from a Smart Device (Epson iPrint)” on page 298
& “Connecting to Devices other than iOS and Android using Wi-Fi Direct” on page 274
Connecting to Android Devices using Wi-Fi Direct
is method allows you to connect the printer directly to your Android device without a wireless router. e
following conditions are required to use this function.
❏ Android 4.4 or later
❏ Epson iPrint version 7.0 or later
Epson iPrint is used to print from a smart device. Install Epson iPrint on the smart device in advance.
Note:
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1.
Tap
on the home screen.
2.
Tap Wi-Fi Direct.
3.
Tap Start Setup.
Adding or Replacing the Computer or Devices > Connecting a Smart Device and Printer Directly (Wi …
272

Epson L6570 Series Specifications

General

Print Technology	PrecisionCore Heat-Free Technology
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner Type	Flatbed color image scanner
Scan Resolution	1200 x 2400 dpi
ADF Capacity	50 sheets
Functions	Print, Scan, Copy, Fax
Fax Function	Yes
Print Speed (Black/Color)	25 ppm / 25 ppm
Duplex Printing	Yes
Display	4.3" color touchscreen
Mobile Printing	Apple AirPrint, Mopria Print Service
Paper Sizes	A4, A5, A6, B5, Letter, Legal
Ink Tank Capacity	Color: 70 mL each (Cyan, Magenta, Yellow)