The density setting is high when sending faxes.
Select Fax > Fax Settings > Scan Settings > Density, and then lower the setting.
Received Fax Quality is Poor
The Image Quality of Received Faxes is Poor
e
following causes can be considered.
ECM setting is disabled.
Select Settings > General Settings > Fax Settings > Basic Settings and enable the ECM setting on the control
panel.
is
may clear errors that occur due to connection problems. Note that the speed of sending and receiving
faxes may be slower than when ECM is disabled.
The image quality setting is low on the sender's fax machine.
Ask the sender to send faxes at a higher quality.
Cannot Solve Problem After Trying All Solutions
If you cannot solve the problem aer trying all of the solutions, contact Epson support.
If you cannot solve printing or copying problems, see the following related information.
Related Information
& “Cannot Solve Printing or Copying Problems” on page 258
Cannot Solve Printing or Copying Problems
Try the following problems in order starting at the top until you solve the problem.
❏ Make sure you match the paper type loaded in the printer and the paper type set on the printer to the paper
type settings in the printer driver.
“Paper Size and Type Settings” on page 30
❏ Use a higher quality setting on the control panel or the printer driver.
❏ Align the print head.
“Aligning the Print Head (Control Panel)” on page 150
Solving Problems
>
Cannot Solve Problem After Trying All Solutions
>
Cannot Solve Printing or Copying Problems
258
To Next Page
Loading...
Need help?
General
