46
Chapter 2 Setup
11
The "Connection complete" window appears. Click [Test Buzzer] or [Test Printing] to
check operation.
12
Click [Back to Main screen] to return to the main window.
13
Click the "x" button of TM Bluetooth Connector to exit.
• If "Error" is displayed when you click the [Search] on the TM Bluetooth Connector, check whether:
* The Bluetooth adapter is installed to the computer.
* Bluetooth is ON in the Windows settings.
• If the device is not displayed on the TM Bluetooth Connector or the TM Bluetooth Connector
Status shows " " after pairing, check the following.
Check whether:
* Make sure the printer is turned on.
* Make sure the printer is no more than 10 meters away from the computer.
* Confirm that there is no other wireless device, such as a microwave oven and cordless
telephone, that can interfere with the Bluetooth printer.
* If the printer and the computer are placed in different rooms separated by a wall, move the
printer and/or the computer in the same room.
* The printer may not be detected when the search time is short. Try search again with longer
search time.
* While a computer and printer are communicating, the printer cannot be detected by other
computers. Confirm that the printer to be detected is not communicating with any computer.
To Next Page
Loading...
