51
Chapter 2 Setup
Setting up using TM-P20II Utility
Connect the printer and computer with a USB cable, and configure the printer's wireless LAN settings on the
computer using the TM-P20II Utility.
Necessary Items
Prepare the following items.
• Computer: Windows 11/10/8.1/8/7
• USB cable: With a Type-C connector required for connecting to the printer
• Setup utility: TM-P20II Utility
Setup Procedure
1
Connect the printer to the computer with a USB cable.
2
Turn on the computer.
3
Turn on the printer.
4
Start TM-P20II Utility.
5
Select the printer and click [OK].
If the printer does not appear, click the [Add Port] button to add the USB-connected printer.
6
Use the [Network] menu to configure the network settings.
For details on the settings, refer to the TM-P20II Utility manual.
7
After completing the settings, turn off the printer.
Wireless LAN setup for the printer is now completed.
To Next Page
Loading...
Need help?
General
