94
Appendix
Recommended Print Density for Specified Base Paper
To ensure good print quality, it is recommended to set the print density (see "Software Settings" on page 57)
according to the paper used.
Specified original paper Print density
TF50KS-EY, TF60KS-E 100%
P220AGB-1 105%
PD160R, PD190R 110%
AP45KS-ND, AP50KS-ND, KT48FA, P5047(46), P5047(55) 120%
KT55FA, KT48PF, KT55PF 130%
To Next Page
Loading...
Need help?
General
