Getting Started 10
Installing the Battery
The viewer comes with a lithium-ion battery.
1 Turn the viewer upside down.
2 Slide the battery cover to the right to open it.
3 Insert the battery into the compartment in the direction
of the arrow on the battery.
4 Close the battery cover and slide it to the left until it
clicks.
Charging the Battery
After installing the battery, you need to charge it using the
AC adapter. It takes about 3.5 hours to fully charge the
battery when the viewer is off, and longer when the viewer
is on.
The
Charge light is green while the battery is being
charged. When the battery is fully charged, the light
turns off.
BATT.
BATT.BATT.
To Next Page
Loading...
Need help?
General
