Maintenance and Troubleshooting 63
Chapter 8
Maintenance and Troubleshooting
This chapter describes how to clean the viewer and solve
problems.
Cleaning the Viewer
Follow these guidelines to clean the viewer:
❍ Turn off the viewer and unplug the AC adapter before
cleaning.
❍ Use a clean, dry cloth to wipe it clean.
❍ Do not use harsh or abrasive cleaners.
Error Messages
When a problem occurs, an error message or icon may
appear on the LCD. Refer to the following table to diagnose
an error message. For more assistance, see “Problems and
Solutions” on page 64.
Error message Description
Unable to access file. Wait until the memory card
access light turns off, then
reinsert the memory card and try
again.
An error occurred during
verification. Files were not
deleted from the memory
card.
Some files failed to be copied.
Check the files and try again.
Cannot access the hard
drive. There may be a
problem with the hard
drive, or it may not be
formatted as FAT32.
Backup all the data to the
computer and contact Epson as
described in “Where To Get
Help” on page 69.
To Next Page
Loading...
Need help?
General
