Getting Started 13
2 Press OK. You see the Date and Time screen:
3 Press up or down on the 4-way ring to change the value
for the selected item (such as the year).
4 To go to the next option (
Month or Day, for example)
press right or left.
5 After setting the date, set the date format.
6 When you finish, highlight
Complete and press OK.
You see the Home screen. See “Using the Home Screen”
on page 14 for details.
Note:
If you remove the battery, the date and time settings will be
erased after about one day. The next time you turn on the
viewer, the date and time setting screen will be displayed.
Locking the Buttons
You can lock the buttons on the viewer. This allows you to
place the viewer in a purse or backpack and use it with
headphones without accidentally pressing the buttons.
To lock the buttons, slide the power switch to
Hold.
To unlock the buttons, slide the power switch back to the
middle position.
To Next Page
Loading...
Need help?
General
