Epson Perfection V500 Photo - Page 56

EPSON Perfection V500 Photo Revision A
MAINTENANCE Overview 56
Figure 6-1. Lubricating the CR Motor Unit
Figure 6-2. Lubricating the Driven Pulley Holder Assy
Figure 6-3. Lubricating the Carriage Lock
Figure 6-4. Lubricating the TPU CR Motor Assy
[Lubrication Point]
Pulley shaft of the CR Motor
Unit
[Lubrication Type]
G-26
[Lubrication Amount]
Adequate dose
[Remarks]
Use a brush to apply it
[Lubrication Point]
Shaft of the Driven Pulley
[Lubrication Type]
G-26
[Lubrication Amount]
Adequate dose
[Remarks]
Use a brush to apply it
Applying Point
Applying Point
Driven Pulley Holder Assy
Applying Point
[Lubrication Point]
Concave portion of the Carriage
Lock
[Lubrication Type]
G-26
[Lubrication Amount]
Adequate dose
[Remarks]
Use a brush to apply it
[Lubrication Point]
A: Idle Pulley shaft on the TPU
CR Motor Assy.
B: Driven Pulley shaft on the
TPU CR Motor Assy.
C: TPU CR Motor pinion gear
[Lubrication Type]
G-26
[Lubrication Amount]
Adequate dose
[Remarks]
Use a brush to apply it
Carriage Lock
Applying Point
Applying Point:B Applying Point:A
Applying Point:C