31
4. Push the card in carefully until it stops (it won’t go in all the way).
When the card is in, the memory card light comes on.
To choose your photos and layout and start printing, see Choosing Photos and
Printing.
Removing Your Memory Card
When you are ready to remove a memory card, make sure the memory card light is
not flashing.
Caution: Do not remove a card while the memory card light is flashing; you may
lose photos on your card.
To remove a card from the top slot, push in the card and release it, then pull it
straight out of the slot.
To remove a card from the bottom slot, push in and release the card release button so
it pops out. Then push in the button again to eject your card and pull it straight out
of the slot.
To Next Page
Loading...
