44
Choosing Bluetooth Settings
If necessary, use the PictureMate Pal buttons to choose settings for Bluetooth wireless
communication. You may need to enter a passkey for PictureMate Pal or turn on
encryption, depending on the Bluetooth-enabled device from which you print.
1. Connect the Bluetooth adapter to PictureMate Pal; see Printing With Bluetooth.
2. Press Menu.
3. Press or to highlight Bluetooth and press OK.
4. To display the device address for PictureMate Pal (set at the factory), press or
to select Device Address and press OK. When you’re finished, click Cancel.
5. Press or to select Settings and press OK.
6. Choose options for each of the BT Settings listed in the table below. Press or
to highlight an option for each setting. Press OK to select the option and move to
the next setting.
Option Settings Description
Device Name PictureMate
Pal-(number)
(Default = 1)
If multiple Bluetooth-enabled printers are
in the same communication range, you
can distinguish them by assigning each a
unique number (from 0 through 9). Turn
PictureMate Pal off and then back on
when you’re finished.
Comm. Mode Discoverable This mode allows Bluetooth-enabled
devices to freely discover PictureMate
Pal and send print jobs.
Not discoverable
(default)
This mode prevents unknown devices
from discovering the printer. To print in
this mode, first search for PictureMate
Pal in Discoverable mode. After that, you
will subsequently be able to print using
this mode.
Pairing (Bonding) This mode requires that a four-digit
Passkey be entered into a device before
it can print from PictureMate Pal.
To Next Page
Loading...
