62
5. You see a window like this one:
6. Look at the printed squares to determine which one is the most even, with no
streaks or lines. (You may need to use a magnifying glass.)
7. Enter the number of the best square (1 to 9) in the box on the screen. Then click
Finish.
If you can’t find a square without lines or streaks, choose the one that looks the
best. Then click Realignment to print another alignment pattern and repeat this
step.
Note: The number that you enter becomes the default setting (#5) the next time
you align the print head.
Cleaning PictureMate Pal
To keep PictureMate Pal working at its best, you should clean it several times a year.
1. Turn off PictureMate Pal, unplug the power cord, and disconnect any USB
cables.
2. Remove all paper, then use a soft brush to clean any dust or dirt from the paper
feeder and output tray.
3. Clean the PictureMate Pal exterior with a soft, damp cloth.
To Next Page
Loading...
