58
5. Press Print. The following alignment pattern is printed:
6. Look at the printed squares to determine which one is the most even, with no
streaks or lines. (You may need to use a magnifying glass.)
7. Press or to highlight the number for the best square (1 to 9). Then press OK.
PictureMate Pal aligns the print head and exits the Maintenance menu.
Note: The number that you enter becomes the default setting (#5) the next time
you align the print head.
Checking the Print Quality Using the Computer
You can check PictureMate Pal’s print quality from your computer and clean the
print head, if necessary.
1. Make sure PictureMate Pal is connected to your computer and turned on but not
printing.
2. Load paper in PictureMate Pal so you can print a nozzle check pattern after
cleaning the print head. See Loading Paper for details.
3. Windows: Right-click the printer icon on your taskbar (in the lower right
corner of your screen). Select Nozzle Check.
Macintosh: Open the Applications folder and select EPSON Printer Utility.
Select PictureMate PM 200 in the printer list, click OK, and select Nozzle
Check
.
4. Follow the instructions on the screen to print a nozzle check pattern.
Best pattern
Misaligned pattern
To Next Page
Loading...
