Epson PictureMate Pal - Page 39

39
Adjusting Borderless Expansion
When you print borderless photos, your images are automatically expanded. If your
photos are cut off around the edges, you can adjust the amount of expansion.
1. Press Menu.
2. Press or to highlight Borderless Expansion and press OK.
3. Press or to select MIN (to reduce the amount of expansion).
4. Press OK.
5. Press Cancel to exit.
If you see white edges on your photos, repeat these steps, but select MID or MAX.
Turning Print Preview On or Off
When Print Preview is On and you press Print, you see a screen that lets you
confirm your selected photos, number of copies, layout, and other settings. Then you
press Print again to start printing.
When Print Preview is Off, PictureMate Pal does not display this screen before
printing. You can press Print just once to start printing.
1. Press Menu.
2. Press or to highlight Print Preview and press OK.
3. Press or to select On or Off, and press OK.
4. Press Cancel to exit.
The Print Preview setting remains in effect until you change it or return to default
settings (see Returning to Default Settings).
Adjusting the Photo Viewer Screen Contrast
If the screen is too light or too dark, you can adjust it.
1. Press Menu.
2. Press or to highlight LCD Contrast and press OK.