42
The following battery status icons appear in the upper
right corner of the photo viewer screen:
With a fully charged battery, you can print from 50 to
80 photos.
Note: When you run PictureMate on the battery, the printer
turns off automatically after 15 minutes if it is not being used.
Press the
On button to turn it back on.
Removing the Battery
If there is a problem with your battery, or you want to
replace it with one that is already charged, you may
need to remove the battery.
1 Make sure PictureMate is turned off.
2 Open the battery cover.
3 Flip down the gray tab on the battery and pull it
straight out.
4 Close the battery cover.
Charging 1/3 full
Full Low
2/3 full Almost out
To Next Page
Loading...
