Epson PictureMate - After Printing

46
The Print Confirmation setting remains in effect until
you change it again or reset the default preferences
(see page 48).
Determining Whether to Keep Selections
After Printing
You can decide whether to keep the print settings and
photos you selected or return to your personal default
settings after you print.
1 At the photo selection menu, press the Menu
button.
2 Press or to highlight Setup, then press to
open the menu.
3 Press or to select Keep Selections After
Printing, then press .
4 Press or to choose from the following
settings, then press OK:
● Ask each time: Lets you choose whether to
save your selections after each print job.
● Always Keep: Save your selections each time
you print.
● Never Keep: Return to your personal default
settings after printing.
5 Continue pressing OK to exit the menu.
Adjusting the Photo Viewer Screen
If the screen is too light or too dark, you can adjust it.
1 At the photo selection menu, press the Menu
button.
2 Press or to highlight Setup, then press to
open the menu.
3 Press or to select Photo Viewer Adjustment,
then press .